MES / haiNeng · Files

using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Text;

namespace Hh.Mes.POJO.EnumEntitys
{
    /// <summary>
    /// agv 任务状态
    /// </summary>
    public enum EnumAGVState
    {

        任务创建 = 0,

        任务已发送 = 10,

        任务执行中 = 20,

        AGV请求进入光栅 = 30,

        MES回复请求进入光栅 = 35,

        AGV已经进入光栅 = 40,

        MES回复已经进入光栅 = 45,

        AGV请求出来光栅 = 50,

        MES回复请求出来光栅 = 55,

        AGV已经出来光栅 = 60,

        MES回复已经出来光栅 = 65,

        AGV搬运完成 = 90,

        任务完成 = 100
    }

    /// <summary>
    /// PLC 
    /// </summary>
    public enum EnumtIsWriteState
    {
        清除 = 0,

        写入 = 1,
    }


    /// <summary>
    /// 质检 发送结果SendResult:
    /// </summary>
    public enum EnumCheckReturnBodySendResult
    {
        成功 = 10,

        失败 = 20,

        失败后重发修改 = 30,
    }

    /// <summary>
    /// 质检结果CheckResult:
    /// </summary>
    public enum EnumCheckReturnCheckResult
    {
        质检合格 = 10,

        质检不合格需要继续质检 = 20,

    }

    //库位区域
    public enum ZoneCode
    {
        /// <summary>
        /// 线边库
        /// </summary>
        XBK,

        /// <summary>
        /// 立库
        /// </summary>
        LK,

        /// <summary>
        ///AGV仓库
        /// </summary>
        AGV,

        /// <summary>
        ///平面仓库
        /// </summary>
        PK,

        /// <summary>
        ///钱柜仓库
        /// </summary>
        QG

    }

    public enum EnumDataSource
    {
        接口 = 1,

        excel = 10,
    }



    /// <summary>
    /// 工序工单头枚举
    /// </summary>
    public enum EnumOrderHeadStatus
    {
        初始化 = 0,

        运输中 = 30,

        生产中 = 60,

        已完成 = 100,

        已结束 = 200
    }

    /// <summary>
    /// 工序工单明细
    /// </summary>
    public enum EnumOrderBodyStatus
    {
        初始化 = 0,

        运输中 = 30,

        生产中 = 60,

        已完成 = 100,

        已变更无需处理 = 200
    }

    /// <summary>
    /// 报工状态
    /// </summary>
    public enum EnumWorkReportStatus
    {
        未报工 = 0,
        开工已报工 = 10,
        完工已报工 = 20,
        无需报工 = 30
    }

    public enum EnumAction
    {
        /// <summary>
        /// 新增,isDelete=1
        /// </summary>
        I,
        /// <summary>
        /// 修改,isDelete=1
        /// </summary>
        U,
        /// <summary>
        /// 删除,isDelete=0
        /// </summary>
        D
    }


    public enum EnumDeleteOrAdd
    {
        新增或更新 = 1,

        删除 = 0
    }

    public enum EnumShiftStatus
    {
        质量问题关闭 = 0,

        质量问题处理 = 1,
    }

    public enum EnumUseLog
    {
        使用 = 1,

        未使用 = 0,
    }

    /// <summary>
    /// 工序任务操作记录类型
    /// </summary>
    public enum EnumOrderBodyType
    {
        开工 = 0,

        完工 = 10,
    }

    /// <summary>
    /// 工序是否自动报检
    /// </summary>
    public enum EnumInspectionFlag
    {
        自动定时器报检 = 10,

        人工报检 = 20,

        默认 = 100
    }

    /// <summary>
    /// Agv 任务类型
    /// </summary>
    public enum EnumAgvTaskType
    {
        /// <summary>
        /// 上料配送
        /// </summary>
        [Description("上料配送")]
        Feeding = 8,

        /// <summary>
        /// 回收料框
        /// </summary>
        [Description("回收料框")]
        Take = 9,

        /// <summary>
        /// 置换料框
        /// </summary>
        [Description("置换料框")]
        Displace = 10,

        /// <summary>
        /// 舵轮配送
        /// </summary>
        [Description("舵轮配送")]
        Distribution = 11,

        /// <summary>
        /// agv移车
        /// </summary>
        [Description("料框移动")]
        Move = 30,

        上料配送 = 10,

        料框回收 = 20,

        置换料框 = 30
    }

    /// <summary>
    /// 叫料状态 10,20
    /// </summary>
    public enum EnumLocationAskingStatus
    {
        未叫料 = 10,

        已叫料 = 20,

        已装料 = 30,

        已送料 = 40,
    }

    /// <summary>
    ///料点状态
    /// </summary>
    public enum EnumLocationStatus
    {
        空闲 = 10,

        锁定 = 20
    }

    /// <summary>
    ///料点状态 10、20、30、100
    /// </summary>
    public enum EnumLoadData
    {
        已装料 = 10,

        配送完成 = 20,

        使用中 = 30,

        完成 = 100
    }

    /// <summary>
    /// 库位(料点区域)
    /// </summary>
    public enum EnumLocationzoneCode
    {
        组队上料区 = 10,

        人工装料区 = 20
    }

    /// <summary>
    /// 料点区域编码 （装料点=10、上料点=20、转运点=30）
    /// </summary>
    public enum EnumLocationZoneCode
    {
        装料点 = 10,

        上料点 = 20,

        转运点 = 30,
        
        缓存点 = 40,
    }

    ///// <summary>
    ///// 库存状态
    ///// </summary>
    //public static class InventoryStatus
    //{
    //    /// <summary>
    //    /// 次品 = "defective"
    //    /// </summary>
    //    public static readonly string 次品 = "defective";
    //    /// <summary>
    //    /// 待确认 = "discussed"
    //    /// </summary>
    //    public static readonly string 待确认 = "discussed";
    //    /// <summary>
    //    /// 良品 = "good"
    //    /// </summary>
    //    public static readonly string 良品 = "good";
    //    /// <summary>
    //    /// 报废品 = "scrap"
    //    /// </summary>
    //    public static readonly string 报废品 = "scrap";
    //}

    /// <summary>
    /// 库存状态
    /// </summary>
    public enum InventoryStatus
    {
        /// <summary>
        /// 次品
        /// </summary>
        defective,

        /// <summary>
        /// 待确认
        /// </summary>
        discussed,

        /// <summary>
        /// 良品
        /// </summary>
        good,

        /// <summary>
        /// 报废品
        /// </summary>
        scrap
    }

    /// <summary>
    /// 是否工装 
    /// </summary>
    public enum EnumtIsWorkClothes
    {
        否 = 0,

        是 = 1,
    }

    /// <summary>
    /// 需MOM补发的数据类型
    /// </summary>
    public enum EnumWaitMOMSend
    {
        物料 = 10,
        工艺路线 = 20,
    }

    public enum InventoryUseState
    {
        未套料 = 0,
        已套料 = 10,
        使用中 = 20,
        使用完毕 = 30,
    }

    /// <summary>
    /// 套料状态
    /// </summary>
    public enum EnumCutPlanHeadStatus
    {
        初始 = 0,
        下料开始 = 10,
        下料完成 = 20,
        切割开始 = 30,
        切割完成 = 40,
        手动完成 = 60,
        手动取消 = 70,
        接口冻结 = 80,
        生产完成 = 90
    }

    /// <summary>
    /// 套料明细状态
    /// </summary>
    public enum EnumCutPlanDetailStatus
    {
        初始 = 0,
        激光打标 = 10,
        开始切割 = 20,
        切割完成 = 30
    }

    /// <summary>
    /// 行走方案状态
    /// </summary>
    public enum CutPlanHeadState
    {
        初始 = 0,
        下料开始 = 10,
        下料完成 = 20,
        切割开始 = 30,
        切割完成 = 40,
        自动完成 = 50,
        手动完成 = 60,
        手动取消 = 70,
        接口冻结 = 80,
        完成=100
    }

    /// <summary>
    /// 工序 需要与工作中心工序编码保持一致
    /// </summary>
    public static class EnumoprSequenceCode
    {
        // <summary>
        /// 套料 = "Nesting"
        /// </summary>
        public static readonly string 套料 = "Nesting";
        /// <summary>
        /// 切割坡口 = "CutBevel"
        /// </summary>
        public static readonly string 切割坡口 = "CutBevel";
        /// <summary>
        /// 打磨 = "Polish"
        /// </summary>
        public static readonly string 打磨 = "Polish";
        /// <summary>
        /// 组对 = "FitUp"
        /// </summary>
        public static readonly string 组对 = "FitUp";
        /// <summary>
        /// 焊接 = "Weld"
        /// </summary>
        public static readonly string 焊接 = "Weld";
        /// <summary>
        /// 组焊 = "FitUpAndWeld"
        /// </summary>
        public static readonly string 组焊 = "FitUpAndWeld";

        /// <summary>
        /// 切割=Cut
        /// </summary>
        public static readonly string 切割 = "Cut";
        
        /// <summary>
        /// 坡口 =Bevel
        /// </summary>
        public static readonly string 坡口 = "Bevel";
    }

    /// <summary>
    /// 工单类型
    /// </summary>
    public enum EnumOrderType
    {
        机器人打磨 = 3,
        锯床切割 = 4,
        端面坡口 = 5,
        组焊一体机 = 6,
        机器人XY轴 = 7,
        组焊平台 = 8
    }

    /// <summary>
    /// 焊接参数下发状态
    /// </summary>
    public enum EnumWeldTechnologyEquipmentStatus
    {
        初始 = 0,
        成功 = 10,
        失败 = 30,
        过期 = 40
    }

    /// <summary>
    /// 管材材质
    /// </summary>
    public enum EnumPipeMaterial
    {
        未指定 = 0,
        碳钢 = 1,
        不锈钢 = 2,
        合金钢 = 3,
        多重钢 = 4
    }


    /// <summary>
    /// 生产计划
    /// </summary>
    public enum EnumProPlan
    {
        初始化 = 10,
        已确认 = 20,
    }

    /// <summary>
    /// AGV呼叫状态
    /// </summary>
    public enum EnumAgvCallState
    {
        初始 = 0,
        接料中 = 10,
        接料完成 = 20,
    }

    public enum EnumCutHeadState
    {
        初始化 = 10,
        排产待发布 = 20,
        发布 = 30,
        部分套料 = 33,
        已套料 = 36,

        冻结 = 40,
        执行 = 50,


        切割进行=51,
        切割完成 = 55,

        切坡进行 = 60,
        切坡完成 = 100,

        坡口进行 = 110,
        坡口完成 = 150,

        打磨进行 = 160,
        打磨完成 = 180,

        完成 = 200,

        切割跟踪发送成功 = 210,
        切割完成回传 = 220,
        已回传 = 300,

        组对完成 = 310,
        焊接完成 = 320,

        组焊完成=330

    }


    /// <summary>
    /// 设备编码
    /// </summary>
    public static class EquipmentCode
    {
        // <summary>
        /// 锯床
        /// </summary>
        public static readonly string 锯床 = "Saw";
        /// <summary>
        /// 端面坡口机
        /// </summary>
        public static readonly string 端面坡口机 = "EndFaceBevel";
        /// <summary>
        /// 机器人打磨
        /// </summary>
        public static readonly string 机器人打磨 = "RobotPolish";
        /// <summary>
        /// 机器人XY焊接
        /// </summary>
        public static readonly string 机器人XY焊接 = "RobotWeld";
        /// <summary>
        /// 组焊一体机
        /// </summary>
        public static readonly string 组焊一体机 = "FitupAndWeld";
        /// <summary>
        /// 3D组焊平台
        /// </summary>
        public static readonly string 组焊平台 = "3DFitupAndWeld";

        
    }

	/// <summary>
	/// 生产订单类型
	/// </summary>
	public enum EnumProOrderType
	{
		正常订单 = 1,

		返工返修订单 = 2,

		/// <summary>机器人打磨订单（打磨）
		/// </summary>
		机器人打磨订单 = 3,

		/// <summary>锯床切割订单（切割）
		/// </summary>
		锯床切割订单 = 4,

		/// <summary>端面坡口机坡口订单（坡口）
		/// </summary>
		端面坡口机坡口订单 = 5,

		/// <summary>组焊一体机组焊订单（组焊）
		/// </summary>
		组焊一体机组焊订单 = 6,

		/// <summary>机器人（XY轴）焊接订单（组焊）
		/// </summary>
		机器人XY轴焊接订单 = 7,

		/// <summary>3D焊接平台订单（组焊）
		/// </summary>
		三D焊接平台订单 = 8,

        /// <summary>成品件生产订单
		/// </summary>
		成品件生产订单 = 9


    }
}